How to calibrate the TVOC sensor in your Laser Egg+ Chemical

To calibrate your Laser Egg+ Chemical's TVOC sensor, follow the steps below:

• Turn the device off then on.
• Take the device outside, where it'll have access to clean, fresh air. For the first five minutes after turning on, the Laser Egg+ Chemical will display the message: 'TVOC sensor warming up.'
• After the sensor has warmed up, remain outside for a few more minutes so your Laser Egg+ Chemical can set a baseline TVOC value. 

For devices that are always plugged in and turned on, you're device will not need to be manually calibrated again. If you do turn your device off, follow the above steps again to set a TVOC baseline value.