Bulk Device Upload for the Kaiterra Data Platform

Here are the steps for using our Bulk Device Upload:

1. Click here to download our CSV template
2. Fill in the appropriate information for each device
   1. building_code
      A simple abbreviation/short form code to represent the building
      ie. 30 Rock might be 30R; a school might be USD123; could also be a region/state
   2. floor_code
      Floor Number
      ie. 1, 2, 3, 4, 5, 6, etc.
   3. space_code
      Room Number -- or the designation on the floor plan
      ie. 123, 201, 404, etc.
   4. space_name
      Specific name assigned to the room on the floor plan
      ie. Nintendo, Gryffindor, Frodo, Shakespeare, etc.
   5. space_type*
      What type of room is the device installed in?
      See the list of valid space types at the bottom of this article (they must match)
      ie. kitchen, conference_room, open_workspace, etc.
   6. space_ext_id [Optional]
      If you have a Serraview ID mapping to this space
      ie. serraview:123456
   7. device_name
      [The following is a Best Practice and not a strict requirement]
      You can use an Excel or Google Sheets formula to piece this together:
      BuildingCode-FloorCode-SpaceName-SpaceType
      ie. 30R-2-Nintendo-ConferenceRoom
   8. device_udid
      Kaiterra UDID -- if you do not have it, we can use the Serial Number to find it for you
      ie. 0000-474f-4f39-b549-2ef13a45e97c
   9. device_serial
      Kaiterra Serial Number -- available on the box or on the device itself
      ie. VG20D99999
      
3. Navigate to the "Buildings" tab, click on "Add --> Upload CSV" in the top-right-hand corner, and follow the on-screen instructions

You can also use this CSV upload to make changes to existing devices by applying the changes in the CSV and then re-uploading the file.